• General Information
• • Manufacturer
  • Allied Telesis, Inc
  • Manufacturer Website Address
  • http://www.alliedtelesis.com
  • Brand Name
  • Allied Telesis
  • Product Line
  • CentreCOM
  • Product Series
  • GS980EM
  • Product Type
  • Layer 3 Switch

Gigabit Layer 3 Lite PoE++/PoE Pass-through Switches

The Allied Telesis GS980EM Series of Gigabit Layer 3 Lite PoE++/PoE passthrough switches offer an impressive set of features in a compact design. Ideal for deployment at the network edge, the GS980EM Series feature flexible Power over Ethernet capabilities to support IoT device connectivity in today's converged business environments.

Overview
Allied Telesis GS980EM Series are secure and reliable, offering 8 x Gigabit PoE enabled ports and 2 x SFP uplinks, and providing a high value solution for flexible PoE at the network edge.

The GS980EM/10H can provide up to 90 Watts (PoE++) on all ports. This enables powering high power devices such as high resolution PTZ cameras with heater/blowers for outdoor applications, enhanced infrared lighting and lighting controllers, and more. The GS980EM/10H requires a PWR300 external power supply to operate and provide PoE power. Up to three PWR300 PSUs can be used to increase the available PoE power.

The GS980EM/11PT can supply up to 30 Watts (PoE+) to connected devices. It can be powered by an AC power adapter, or by PoE1 . When deployed together, the GS980EM/11PT can be powered by the GS980EM/10H, while PoE pass-through enables power from the GS980EM/10H to pass through the GS980EM/11PT to power connected end points.

Specifications | Performance

• 10KB L2 jumbo frames
• 4094 configurable VLANs
• Up to 16K MAC addresses
• Up to 2K multicast entries
• 512MB DDR3 SDRAM
• 128MB NAND flash memory Û¼ Packet buffer memory: 1.5MB

Reliability

• Modular AlliedWare Plus operating system
• Full environmental monitoring of PSUs, fans, temperature and internal voltages. SNMP traps alert network managers in case of any failure

Flexibility and Compatibility

• 1G-SFP ports on GS980EM will support any combination of Allied Telesis 100Mbps and 1000Mbps SFP modules listed in this document under Ordering Information
• Port speed and duplex configuration can be set manually or by auto-negotiation

Diagnostic Tools

• Active Fiber Monitoring detects tampering on optical links
• Built-In Self Test (BIST)
• Cable fault locator (TDR)
• Find-me device locator
• Automatic link flap detection and port shutdown
• Optical Digital Diagnostic Monitoring (DDM)
• Ping polling for IPv4 and IPv6
• Port mirroring
• Trace Route for IPv4 and IPv6
• Uni-Directional Link Detection (UDLD)

IP Features

• RIP, OSPF, and Static routing for IPv4
• Device management over IPv6 networks with SNMPv6, Telnetv6, SSHv6
• IPv6 hardware ACLs
• Log to IPv6 hosts with Syslog v6
• IPv6 Ready certified